Used homogenising mixers & process plants

Are you looking for a used homogenizing mixer and need production capacities? Is a new system too expensive for you or is the delivery time too long for you?

We usually have a small inventory of homogenizing mixers, process systems, inline homogenizers and process equipment in stock with which we can deliver at short notice.

It is important to us that we only deal with machines in a very good condition. The machines are sold completely serviced by us. We accompany you from the design to the commissioning at your company "Turn Key", so that you can carry out your project with us without the usual risk associated with used machines.

It goes without saying that we give the machines a standard industry guarantee of 12 months, excluding wear parts. More details in our terms and conditions.

Please contact us for further information on the homogenizing mixers and process systems included in our offer.

If one of the systems offered comes close to your requirements, but does not have some of the properties you require, we will be happy to check with you the possibilities of adapting the agitator to your requirements.

Would you like to sell your process plant? Talk to us, maybe we know a suitable prospect through our expertise.

Vakumix inline homogenizer in the form of lying and mobile on rollers.

For connection to existing containers
Connection suction side: DN 100
Connection pressure side: DN 80
kW: 30
Suction device on the front side DN25 for sucking in liquids.
NEW: Control, converter, all seals including mechanical seal.
The continuous homogenizer is PLC controlled.

Delivery time about 4 weeks.

This Unimix SR15 was bought by a well-known cosmetics manufacturer in 1986 and operated until 2019. The machine comes first hand.

The laboratory mixer was completely overhauled, a new homogenizer motor and converter were installed, the electrics were renewed, including new controls, and all O-rings and valve seals were replaced.

Working volume 15 liters

Homogenizer with circulation line for homogenizing in the vessel or in recirculation via circulation line. The machine lid including the agitator can be raised and lowered hydraulically. Various connections on the cover, valves, clamps, ...

Delivery time about 4 weeks.

Homogenizer Becomix RW60 CD *

Homogenizing mixer, also for rent

Key data:
• Becomix RW60 CD
• Working volume: 60L
• Anchor agitator with scrapers and baffle
• Homogenizer with right / left run (homogenization / pump mode)
• Circulation line
• CIP
• Lid can be lifted hydraulically
• Fully automatic, control via touch display
• Heating, cooling, vacuum, ...
• New seals
• Pharmaceutical design, but can also be used in cosmetics

The machine is fully serviced and available for rent. We take care of your project "turn key", including in-house commissioning and startup.

Delivery time about 4 weeks.

*In the client's order

Homogenizing mixer, also for rent

Key data:
• Becomix RW60 CD + preparation vessel 50L
• Working volume: 60L and 50L
• Anchor agitator with scrapers and flow breakers
• Homogenizer with right / left run (homogenization / pump mode)
• Circulation line
• CIP
• Lid can be lifted hydraulically
• Fully automatic, control via touch display
• Heating, cooling, vacuum, ...
• New seals
• Pharmaceutical version, but can also be used in cosmetics

The machine is fully serviced and available for rent. We take care of your project "turn key", including in-house commissioning and start up.

Delivery time about 4 weeks

*In the client's order

Unimix SR200 from a renowned cosmetics manufacturer  manufactored 1973 first hand. The homogenizing mixer was operated until 2020.

The homogenizing mixer was completely overhauled and, for example, a new agitator seal was installed, gear oil changed, all O-rings and valve seals replaced.

Homogenizer with circulation line for homogenizing in the vessel or in recirculation via circulation line. The machine lid including the agitator can be raised and lowered hydraulically. A new thermometer was installed to control an external heater.
Various connections on the cover, valves, clamping ring, ...

The machine is overhauled and ready for operation!

Delivery time about 4 weeks.

Vakumix VHM300 + AB225 from first hand. The homogenizing mixer was operated until 2020.

The homogenizing mixer has been completely overhauled, all O-rings and valve seals have been replaced.

Homogenizer with circulation line for homogenizing in the vessel or in recirculation via circulation line. The machine lid including the agitator can be raised and lowered hydraulically.

Delivery time approx. 5-6 months.

2 homogenizing mixers Vakumix VHMS1250 each with anchor scraper agitators and baffles, as well as homogenizer and Umlafur agitator.

we offer the mixer "turn key" up to commissioning.
The system can be viewed in the Bremen area.
Sale takes place on behalf of the customer.

The essential key data:

2 pieces mixer with a net capacity of 1250 liters, with agitators
min.volume depending on the product 200 - 250 liters
1 piece of stainless steel work platform, approx. 10 m2
1 piece control IPC - control with two control panels, recipe operation, docu.

Container P1 is used for mixing, stirring and homogenizing liquids, suspensions, emulsions, creams, gels for semi-solid pharmaceutical dosage forms.
Container P1
Continuous homogenizer installed in the outlet of the container for circulating homogenizing.
- Power 30 KW at 3500 rpm
- Speed ​​50 Hz = 2860 - 67 Hz = 3835 rpm
- Speed ​​adjustable from 500 - 3500 rpm.
- Homogenizer based on the rotor stator principle
- Housing and parts in contact with the product made of material 1.4571 / 1.4404 / 1.4435
- Sealed by mechanical seal Mechanical seal - SIC / SIC
- with delivery thread
- Motor painted to RAL 9007 - metal effect
- voltage 400 V.
- Connection for the circulation pipe drainage DN 80
- Circulation DN 50
- Screw connections according to DIN 11851
- Paraffin oil spear fluid system.
- CIP cleaning can be carried out with the homogenizer.

Container P2 is used for mixing, stirring and homogenizing liquids, suspensions, emulsions, creams, gels for semi-solid pharmaceutical dosage forms.

Containers P1 and P2
AP - water metering - branch from ring main,
Consisting of:
1 piece Coriolis mass meter DN 25 - 83I26 Profibus DP
2 metering diaphragm valve DN 25,
with 2-step setting, feedback OPEN
1 piece diaphragm valve DN 25, with A / Z messages
1 piece of aseptic check valve DN 25
3 valve terminal units
1 piece of piping work
1 piece sampling valve

Reservoir P1 + P2
New seals SV seals - FKM,
Screw connection seals FKM,
O-rings FKM
FDA Conformity Certificate

Operation is carried out jointly on 2 control panels.
1x on the work platform
1x down in front of the working platform

Pressure range product -1 / +0 bar,
Temperature jacket -1 / +4 bar,
Surface ground inside 0.8 ym,
Outside surface 1.6 ym sanded, weld seam areas in contact with the product 1.6 ym sanded
Materials: in contact with product 1.4404
Heating jacket 1.4541
not in contact with the product 1.4301

Agitator gear 11 kW, infinitely variable via converter
Change of direction of rotation, sealing via dry-running single-acting mechanical seal

Equipment per container:
1 piece disc valve in the bottom DN 80, with pneum. Drive and double feedback,
1 piece circulating pipe DN 50 heated,
1 piece sampling valve in the circulation line,
1 piece transfer valve, type diaphragm valve with pneum. Drive and double feedback,
1 piece shut-off valve in the riser, type diaphragm valve, with pneum. Drive A / Z message
1 piece disc valve in tank return, DN 50, with pneum. Drive A / Z message
1 piece disc valve for submerged powder suction, type Membranev. pneum. Drive A / Z
1 piece of sight glass in the tank return at the top,
1 piece disc valve for powder feed, with pneum. Drive and double feedback,
1 piece junction point for powder suction with suction housing

Equipment lid:
1 piece agitator flange, with agitator gear - dry-running mechanical seal
1 piece of safety assembly consisting of:
1 piece of butterfly valve vacuum,
1 piece of butterfly valve nitrogen,
1 piece safety valve,
1 piece pressure gauge with display -1 / +5 bar,
1 piece under-mirror suction nozzle,
1 piece DN 50 nozzle for liquid suction
2 spare nozzles DN 40, these are used for installing the CIP cleaning heads
1 piece sight glass DN 100, with light, button and wiper (silicon), glass pane made of borosilicate glass
1 piece manhole DN 400, with limit switch and spring opening aid
1 piece anchor agitator - version with sliding paddle on agitator arms,
1 pc breaker (1 x incl. PT 100) temperature control

Heating and cooling assembly via secondary circuit for each container
1 piece of heating by means of hot water and heat exchanger, including measuring and control fittings.
1 piece circulation pump including measuring and control fittings wired and cabled in terminal boxes. Product temperature adjustable from 15 ° C to 95 ° C. Control and regulation via the visualization. It is heated with steam at 4 bar overpressure, max. 151 ° C

Vacuum assembly
1 piece water ring vacuum assembly in block design, housing in gray cast iron, impeller in bronze, non-return valve in PTFE ball sealing of the shaft seal via mechanical seal in CrNiMo steel / carbon / NBR liquid supply via solenoid valve and needle valve for liquid regulation. A check valve with corresponding counter flanges is provided on the suction side.
1 piece of liquid separator for the separation of gases and operating fluids